FPV 1/3 inch HD Color CMOS 600TVL Mini CameraDescription:ImageSensor1/3inchHDColorCMOSHorizontalResolution600TVLineEffectivePixel768(H)×576(V)MinimumIllumination0.008LuxAngle60 DegreeSignalsystemPALBackLightCompensationAutoGamma0.5S/NRatioMorethan50db(AGC-OFF)ScanningSystem2:1InternalSynchronizationSystemInternalSynchronizationShutterSpeed(N)1/60-1/10000s,(P)1/50-1/10000sVideoOutput1.0Vp-p/75ΩPowerSupplyDC 3.3V- 5VOperationTemperature-10C~50C/0F~110FDimensions21*21*28mmWeight18gProduct review from customer:A great little camera - Ideal for FPV:I received 2 of these small camera's yesterday morning, which was quick delivery. I usually have reservations about spec's from China, which some time can get a little exaggerated, these state 600TVL, so I tested against a 'known' 700TVL camera, and these were very close in video quality, so full marks for accurate specs. There seems to be a lot of confusion about what volts these run at?? the Spec says 3.3v to 5v, which IS correct. I have tested from 3.3v to 5v with no problems. This camera is ideally suited to run of a single cell LiPo, the size of the battery can be Very small, as the camera only draws about 70mA. So this camera is pretty much perfect for FPV.. the camera at 18gms Plus a small single cell LiPo, I'm using a 550mA LiPo, just because I had 4 in stock, this weighs 20.1gms, so 38gms for cam & battery is light weight. This LiPo would power the camera for 7.8 Hours, so over-kill. A 110mA LiPo would be better, if lower weight is important, still with a 1.5 hour run time. Also note: The lens is a standard MTV lens, so lenses can be changed to suit your needs. I Hope the info helps. StevePackageincluded:1x600TVLCamera1xCable vladjohnny Store
